2CDX / Horizontal stainless steel centrifugal pump
2CDX places twin centrifugal impellers in a horizontal stainless steel pump. Its catalogue lists water supply, water treatment, irrigation and air-conditioning duties. The two-impeller arrangement offers a different flow-head selection from the single-impeller CDX range, so the published curve should guide specification.
Range bounds are a catalogue overview. Check flow and head together on the selected model curve; maximum values are not a guaranteed combined duty point.
Series catalogue ↗Series overview
The 2CDX catalogue identifies AISI 304 stainless steel for the pump body, impellers, diffuser, casing cover and shaft. It provides separate performance data for the listed twin-impeller models and shows single-phase and three-phase variants where available. Applications include pressure boosting, water supply, water treatment, irrigation and air-conditioning systems.
The source also mentions moderately aggressive liquids, but liquid compatibility depends on the full pump and seal materials, including the carbon-ceramic-NBR mechanical seal. Use the actual operating flow and required head to choose among the listed models. This twin-impeller design belongs to the horizontal surface-pump range.
AISI 304 pump body, impeller, diffuser, casing cover and shaft; aluminium bracket and motor casing; carbon/ceramic/NBR mechanical seal.
Maximum working pressure 8 bar and maximum liquid temperature 110 °C. Confirm liquid compatibility and provide user-supplied thermal protection on three-phase versions.
2CDX uses a horizontal twin-impeller centrifugal arrangement. Select it using its own flow and head curves.
The catalogue says thermal protection for the three-phase version must be provided by the user. Single-phase versions have automatic thermal overload protection.
Technical documents
2 pages · 121,3 KB
Choose the pump by the liquid, required flow and total head, electrical supply and installation conditions.
3M is a stainless steel standard-pump series for clean-water and selected industrial transfer duties. The catalogue identifies stainless steel wetted parts and a back pull-out arrangement that gives access to the rotating assembly without removing pipework. Its application and material profile differ from the cast-iron CM range.
View series
CDX is a compact horizontal centrifugal pump with a single impeller, axial suction and radial discharge. The catalogue identifies AISI 304 stainless steel hydraulic components and threaded connections. It covers pressure boosting and general water transfer where the selected liquid matches the pump materials.
View series
CM is a close-coupled centrifugal range presented to the EN733 pump standard. The catalogue describes a coated cast-iron casing, alternative impeller materials and continuous-duty motor construction. It addresses clean-water supply and circulation across a broad set of civil, agricultural and industrial uses.
View series