SP / Submersible well-water range
SP is the stainless steel borehole family, with curves and performance tables across several listed well-pump sizes. Stainless steel impellers distinguish it from SA's plastic-impeller construction. The catalogue gives the data needed to match water supply duty to well size, stage count and motor arrangement.
Use the individual SP model table and curve for flow, head and motor power. The brochure does not present a single shared performance envelope for every well class.
Series catalogue ↗Series overview
The SP catalogue presents multistage submersible pumps for water supply from wells and reservoirs, domestic and civil systems, industrial uses and irrigation. Its material tables identify stainless steel impellers and diffusers in the listed constructions, while specific components and sizes vary across the family. The tables show model-by-model flow and head rather than one duty point for the whole series.
For a sandy well, compare the stated water condition and pump construction with the actual water quality before selection. Confirm well diameter, available electrical supply and motor control as part of the system design. SP remains distinct from the SA range because the impeller material and performance families differ.
Stainless steel hydraulic construction. The material tables specify AISI 304 impellers and diffusers for the listed 6SP construction, with AISI 304/AISI 316 options in listed larger constructions; confirm the exact material schedule for the selected range.
Liquid-temperature limits vary by subrange: 4SP and 5SP specify a maximum of 35 °C; 6SP, 8SP and 10SP specify 50 °C. Maximum sand content is 0.25% where stated in the applicable overview. Confirm the exact subrange, model and electrical arrangement.
No. The 4SP overview states 35 °C; the 6SP, 8SP and 10SP overviews state 50 °C. Check the page for the selected range.
No. Stainless steel grades and listed components depend on the range. Use the material table for the selected configuration, especially where AISI 304/AISI 316 options are shown.
Technical documents
23 pages · 4,7 MB
Choose the pump by the liquid, required flow and total head, electrical supply and installation conditions.
SA groups several well-pump sizes within one borehole catalogue. The range uses multistage hydraulics for water supply, with plastic impellers identified in its construction pages. Select the listed size and model by well conditions, required flow and head, electrical supply and the catalogue’s operating limits.
View series