DWO / Stainless steel horizontal centrifugal pump
DWO uses an open impeller for liquids that may carry suspended solids. Its single-page catalogue identifies AISI 304 stainless steel hydraulic parts and gives examples from food-processing washdown and industrial washing. The model table provides the performance data needed to match this duty to a pump.
Range bounds are a catalogue overview. Check flow and head together on the selected model curve; maximum values are not a guaranteed combined duty point.
Series catalogue ↗Series overview
The DWO catalogue describes an open-impeller centrifugal pump with an AISI 304 stainless steel body, impeller, shaft and other hydraulic components. It is intended for dirty-water duties with suspended solids within the stated passage and operating limits. Examples include washing vegetables, meat and fish, industrial cleaning of bottles and crates, and certain process liquids.
The source gives a distinct solids-passage and performance table, so neither the allowable solids nor the flow and head should be generalized across models. Check liquid and seal compatibility before use in a particular process. DWO is a horizontal surface centrifugal pump for the stated dirty-liquid applications.
AISI 304 pump body, open impeller and shaft; carbon/ceramic/NBR mechanical seal; cast-iron support and motor housing.
Maximum working pressure 8 bar, maximum liquid temperature 90 °C and maximum solids passage 19 mm. Check solids and liquid compatibility for the selected process.
The catalogue lists food-processing washing, industrial washing of containers and process handling of dirty liquids, including paint-plant applications. Check compatibility with the actual liquid.
No. The catalogue states a maximum solids passage of 19 mm. Check the actual solids and operating duty before selection.
Technical documents
1 page · 249,1 KB
Choose the pump by the liquid, required flow and total head, electrical supply and installation conditions.
2CDX places twin centrifugal impellers in a horizontal stainless steel pump. Its catalogue lists water supply, water treatment, irrigation and air-conditioning duties. The two-impeller arrangement offers a different flow-head selection from the single-impeller CDX range, so the published curve should guide specification.
View series
3M is a stainless steel standard-pump series for clean-water and selected industrial transfer duties. The catalogue identifies stainless steel wetted parts and a back pull-out arrangement that gives access to the rotating assembly without removing pipework. Its application and material profile differ from the cast-iron CM range.
View series
CDX is a compact horizontal centrifugal pump with a single impeller, axial suction and radial discharge. The catalogue identifies AISI 304 stainless steel hydraulic components and threaded connections. It covers pressure boosting and general water transfer where the selected liquid matches the pump materials.
View series