SS / Submersible pump with open impeller
SS is a submersible sewage series with an open impeller and options shown for single-phase and three-phase power. The catalogue notes suitability for water containing fibers. Its compact performance sheet brings together materials, model codes and curves for drainage and sewage-treatment duties.
Range bounds are a catalogue overview. Check flow and head together on the selected model curve; maximum values are not a guaranteed combined duty point.
Series catalogue ↗Series overview
The SS catalogue lists sewage treatment plants, industrial drainage and agricultural irrigation as applications. It identifies an open impeller, a cast-iron outer motor casing and a graphite-ceramic mechanical seal. The motor is described as rewindable, and float-switch versions appear in the model list.
The series can handle water containing fibers within its stated operating conditions; the source does not describe a cutter. Select the required pump against its published flow and head curve, then check the electrical version and site control arrangement. SS is kept as its own series so its construction and hydraulic data are not confused with WC cutter or FC channel-impeller pumps.
Cast-iron G20 external motor casing and graphite-ceramic mechanical seal; open impeller construction.
Maximum fluid temperature 50 °C. Suitable for water containing fibres. The model table pairs SS three-phase models with SSM…F single-phase float-switch variants; confirm the complete model code and control arrangement.
The catalogue specifies an open impeller and suitability for water containing fibers. It does not specify a cutter assembly.
The model-code section identifies SS as three-phase and SSM…F as single-phase with a float-switch designation. Check the exact listed model before ordering.
Technical documents
1 page · 171,3 KB
Choose the pump by the liquid, required flow and total head, electrical supply and installation conditions.
WC combines a submersible sewage pump with a cutter impeller and ring. The cutting assembly reduces fibrous material before it enters the discharge path. The catalogue covers two-pole and four-pole constructions for wastewater and sewage duties where a standard drainage impeller may be more prone to obstruction.
View series
FC is a light sewage range with a closed single-channel impeller. Its catalogue covers clean to slightly dirty water and lists the solids passage for each model. Stainless steel construction and single-phase or three-phase versions make it a distinct series from the larger FC stainless steel wastewater catalogue.
View series
FC Inox is the separate FC wastewater catalogue with a double-channel impeller and stainless steel wetted parts. Its stated applications span water exchange, drainage and filtration in agricultural and landscape settings. The model range and hydraulic data differ from the light FC catalogue and should be read independently.
View series